WOLKENKRAFT VAPEMOD CBD Starter Kit *Blue*
WOLKENKRAFT VAPEMOD Starter Kit * Blue* for CBD oils and CBD liquids
Installation instructions for the WOLKENKRAFT VAPEMOD:
2. Insert the cartridge into the battery pack.
3. Press the button. Use the WOLKENKRAFT VAPEMOD when the light shines continuously.
Operation of the WOLKENKRAFT VAPEMOD:
2. Intelligent preheat function: press the button twice briefly and the device will start preheat mode. The red LED flashes slowly for 15 seconds if the key is not pressed again.
3. Evaporation: Press and hold the button to start evaporation. After 8 seconds, the LED flashes 6x in quick succession and no more steam is produced until the button is pressed again.
4. Control the voltage level (the temperature levels): press the button 3 times briefly to switch through the temperature levels; 2.6V (green), 3.3V (yellow), 4.1V (red).
5. If there is no cartridge in the device, the LED flashes 3x fast: 2.6V (green), 3.3V (yellow), 4.1V (red).
6. The battery is empty: the LED flashes red fast 8x and it is not possible to switch on the device.
7. Charging the battery: the LED indicates the battery charge status (green> 70%, yellow 30% - 70%, red <30%). The battery is fully charged when the LED is solid green.
8. The device only supports charging via "Micro-USB". Use only the supplied micro USB cable. Do not try to charge the device with other cables.
WOLKENKRAFT VAPEMOD Starter Kit Details:
- for CBD oils and CBD liquids
- Easy handling
- 1.2 ml cartridge refillable
- Adjustable voltage 2,6 - 4,1V
- Voltage / temperature is signaled with the respective LED color
WOLKENKRAFT VAPEMOD Starter Kit Scope of delivery:
- 1x 900 mAh battery
- 1x 510 'magnet adjustment ring
- 1x Micro USB charging cable
- 1x manual in German and English
I just got this little vapemode. It is sooo cute. It is realy easy to use and it produces a lot of flavorful vapor. Very nice!