Dynavap M7 Vaporizer TwoToniuM
Buy the DynaVap M7 TwoToniuM Vaporizer Online
The DynaVap M7 TwoToniuM is a limited special edition of the well-known M7 and combines the latest M7 technology with a high-contrast two-tone finish. This battery-free dry herb vaporizer is made entirely from stainless steel and is heated manually using an external heat source.
What makes the TwoToniuM stand out is the combination of darker and lighter surface sections. Technically, it corresponds to the current DynaVap M7 and therefore features the updated tip, improved airflow, Adjust-a-Bowl, Pivot Airport, and the typical Captive Cap with an audible click signal.
What makes the TwoToniuM stand out is the combination of darker and lighter surface sections. Technically, it corresponds to the current DynaVap M7 and therefore features the updated tip, improved airflow, Adjust-a-Bowl, Pivot Airport, and the typical Captive Cap with an audible click signal.
Battery-Free Vaporizer with Manual Temperature Control
The DynaVap M7 TwoToniuM works completely without a battery, display, or electronics. It is heated using an external heat source, such as a single-flame torch lighter or a compatible induction heater.
This keeps operation deliberately mechanical and direct. Vapor production can be influenced through heating time, flame position, and the number of heating cycles without relying on predefined digital temperature settings. DynaVap recommends a butane torch lighter or induction heater for particularly consistent heating.
This keeps operation deliberately mechanical and direct. Vapor production can be influenced through heating time, flame position, and the number of heating cycles without relying on predefined digital temperature settings. DynaVap recommends a butane torch lighter or induction heater for particularly consistent heating.
Captive Cap with Characteristic Click Signal
The Captive Cap acts as the temperature indicator on the DynaVap M7 TwoToniuM. During heating, the cap clicks when the intended temperature range has been reached and the device is ready for use.
A second click follows as the cap cools down. The device should only be reheated after this cooling click. This mechanical principle is one of the defining features of DynaVap vaporizers and works entirely without sensors, a display, or a battery.
A second click follows as the cap cools down. The device should only be reheated after this cooling click. This mechanical principle is one of the defining features of DynaVap vaporizers and works entirely without sensors, a display, or a battery.
Updated M7 Tip with Higher Heat Retention
The new M7 Tip has more mass around the herb chamber and therefore retains heat longer than previous M models. This supports powerful draws and, with suitable heating technique, can also allow extensive extraction within a single heating cycle.
At the same time, the mass around the chamber walls has been redistributed. This is designed to distribute heat more evenly and reduce the risk of individual hot spots.
At the same time, the mass around the chamber walls has been redistributed. This is designed to distribute heat more evenly and reduce the risk of individual hot spots.
Finless Tip with Reduced Heat Transfer
The M7 does away with the traditional cooling fins used on earlier tips. The so-called Finless Tip was designed to transfer less heat from the tip toward the stem.
According to the manufacturer, heat transfer can be reduced by up to 20% compared with previous designs. This helps keep the area where the vaporizer is held more comfortable during use.
According to the manufacturer, heat transfer can be reduced by up to 20% compared with previous designs. This helps keep the area where the vaporizer is held more comfortable during use.
More Airflow and a Higher Convection Share
The fit between the Captive Cap and the tip has been revised on the DynaVap M7. This allows more air to move through the system and increases the convection share during the draw compared with older M generations.
The result is a freer draw and more even heating of the material. Combined with a controlled heating technique, this makes it possible to fine-tune the draw characteristics very precisely.
The result is a freer draw and more even heating of the material. Combined with a controlled heating technique, this makes it possible to fine-tune the draw characteristics very precisely.
Pivot Airport for Direct Airflow Control
The stem of the M7 features a redesigned airport with a so-called Pivot Rocker. This side air inlet allows additional ambient air to be mixed in during the draw.
Airflow can be controlled directly with a finger. Depending on how far the airport is opened or closed, the draw resistance and vapor concentration change accordingly.
Airflow can be controlled directly with a finger. Depending on how far the airport is opened or closed, the draw resistance and vapor concentration change accordingly.
0.1 g Chamber with Adjust-a-Bowl for Smaller Loads
The herb chamber of the DynaVap M7 TwoToniuM holds approximately 0.1 g of material. Using the Adjust-a-Bowl function, the usable chamber size can be reduced to roughly half its normal capacity.
This makes the M7 suitable for both normally filled chambers and smaller portions. The position of the stainless steel screen inside the tip is adjusted to change the chamber size.
This makes the M7 suitable for both normally filled chambers and smaller portions. The position of the stainless steel screen inside the tip is adjusted to change the chamber size.
10 mm Water Filter Compatibility
The M7 can be used directly through the mouthpiece, but the stem is also compatible with 10 mm connections. This allows the vaporizer to be combined with suitable water filters or glass adapters.
The modular DynaVap system can therefore be expanded with additional cooling options.
The modular DynaVap system can therefore be expanded with additional cooling options.
TwoToniuM Limited Edition with Two-Tone Finish
The TwoToniuM Edition looks noticeably different from the standard M7. DynaVap combines a darker finish with lighter sections to create a clear two-tone contrast across the tip and stem.
Verdampftnochmal also describes scratch-resistant tapers as an additional visual feature of this limited edition. As a special edition, availability is limited.
Verdampftnochmal also describes scratch-resistant tapers as an additional visual feature of this limited edition. As a special edition, availability is limited.
Stainless Steel Construction and Modular Design
The DynaVap M7 TwoToniuM is made from stainless steel and contains no electronic components. The tip, stem, condenser, cap, screens, and O-rings can all be disassembled individually and replaced when needed.
This makes the device particularly durable while also simplifying cleaning and maintenance. Many DynaVap components use a modular design and can be combined with compatible accessories.
This makes the device particularly durable while also simplifying cleaning and maintenance. Many DynaVap components use a modular design and can be combined with compatible accessories.
Easy Cleaning Without Electronics
Because the DynaVap M7 TwoToniuM has neither a battery nor electronic components, most of the device can be disassembled for cleaning. The stem, condenser, tip, and screen can all be cleaned separately.
The Captive Cap should be maintained according to the manufacturer's instructions and should not be left in cleaning solution for unnecessarily long periods. Thanks to the mechanical construction, overall maintenance remains straightforward.
The Captive Cap should be maintained according to the manufacturer's instructions and should not be left in cleaning solution for unnecessarily long periods. Thanks to the mechanical construction, overall maintenance remains straightforward.
Who Is the DynaVap M7 TwoToniuM For?
The DynaVap M7 TwoToniuM is aimed primarily at users who deliberately want to avoid batteries and electronics and prefer to control extraction manually through heat input. With its small chamber, Adjust-a-Bowl, new tip, and freely adjustable airflow, the vaporizer can be used for both smaller portions and powerful individual draws.
The limited TwoToniuM Edition combines the current M7 technology with a distinctive two-tone finish. Users who are already familiar with DynaVap and are looking for a special version of the M7 get the current M7 platform with a unique appearance.
The limited TwoToniuM Edition combines the current M7 technology with a distinctive two-tone finish. Users who are already familiar with DynaVap and are looking for a special version of the M7 get the current M7 platform with a unique appearance.
Details:
-
Device type: Battery-free dry herb vaporizer / Thermal Extraction Device
-
Model: DynaVap M7 TwoToniuM
-
Edition: Limited TwoToniuM special edition
-
Material: Stainless steel
-
Heating principle: External heat source
-
Suitable heat sources: Torch lighter or induction heater
-
Temperature indicator: Mechanical click signal from the Captive Cap
-
Chamber size: approx. 0.1 g
-
Dosage: Adjust-a-Bowl reduces the chamber to approximately half its normal size
-
Airflow control: Pivot Airport
-
Water filter compatibility: 10 mm
-
Electronics: None
-
Battery: Not required
-
Manufacturer: DynaVap
-
Country of manufacture: USA
-
Warranty: Limited lifetime manufacturer warranty on metal components covered by DynaVap
What's Included:
-
1 x DynaVap M7 TwoToniuM Vaporizer
-
1 x DynaVap Captive Cap
-
1 x M7 TwoToniuM stainless steel tip
-
1 x M7 TwoToniuM stainless steel stem
-
1 x stainless steel condenser
-
1 x stainless steel CCD screen
-
2 x high-temperature O-rings for the tip
-
2 x condenser O-rings
-
1 x DynaVap Tin Case
-
1 x DynaTorch single-flame torch lighter, unfilled
-
1 x Pink Slip cleaning tool
Warranty
DynaVap provides a limited lifetime manufacturer warranty on the M7 metal components covered by the manufacturer's warranty. Wear parts such as O-rings and CCD screens, as well as purely cosmetic changes, are excluded from this warranty. The separately advertised 90-day satisfaction guarantee applies, according to DynaVap, only to purchases made directly from DynaVap and should therefore not be confused with the manufacturer warranty for purchases made through retailers.
FAQ: DynaVap M7 TwoToniuM
What is the DynaVap M7 TwoToniuM?
The DynaVap M7 TwoToniuM is a limited two-tone special edition of the M7. Technically, it is based on the current M7 and combines its stainless steel construction, Captive Cap, updated tip, and Pivot Airport with a high-contrast two-tone finish.
Does the DynaVap M7 TwoToniuM require a battery?
No. The M7 TwoToniuM has neither a battery nor electronic components. It is heated using an external heat source such as a torch lighter or compatible induction heater.
How do I know when the DynaVap M7 is hot enough?
The Captive Cap produces an audible click when the intended temperature range has been reached. It clicks again while cooling down, indicating that a new heating cycle can be started.
How large is the herb chamber on the DynaVap M7 TwoToniuM?
The chamber holds approximately 0.1 g of herbs. Adjust-a-Bowl allows the usable chamber size to be reduced to approximately half.
What is the difference between the M7 and M7 TwoToniuM?
Both models share the key M7 functions. The TwoToniuM differs primarily through its limited two-tone finish with contrasting darker and lighter sections.
What is the Pivot Airport on the M7?
The Pivot Airport is the side air inlet on the M7. The rocker allows the user to control how much additional air enters the vapor path while drawing.
Can the DynaVap M7 TwoToniuM be used with an induction heater?
Yes. DynaVap explicitly lists induction heaters as a suitable heat source. The M7 is compatible with suitable models from YLL and The Wand, among others.
Is the DynaVap M7 TwoToniuM compatible with water filters?
Yes. The M7 is compatible with 10 mm connections and can therefore be combined with suitable water filters or glass adapters.
What material is the DynaVap M7 TwoToniuM made from?
The tip, stem, and condenser are made from stainless steel. The M7 contains no electronic components and is manufactured in the USA.
What warranty applies to the DynaVap M7 TwoToniuM?
DynaVap provides a limited lifetime manufacturer warranty on the metal components covered by the warranty. Wear parts such as O-rings and CCD screens, as well as purely cosmetic changes, are excluded.
