Limelight Frolic Vaporizer
Order accessories:
Our bestseller has been improved even further! This Aquavape vaporizer water filter made of robust borosilicate glass provides for a more pleasant inhalation when using different vaporizers.
The 18 mm WPA adapter for the Limelight Frolic is a dedicated accessory for using the Frolic Thermal Extractor with external water filtration systems such as glass bubblers or water pipes with a 18 mm cut. Routing the vapour through a water filter allows additional cooling and conditioning without changing the internal vapour path of the device.
The flat mouthpiece for the Limelight Frolic is a compatible accessory designed for direct inhalation without any additional extension or attachment. It is designed to keep the vapour path compact while directing the airflow straight to the mouth. The flat mouthpiece is an alternative to the standard supplied mouthpiece and offers a slightly different draw geometry, which can influence draw resistance and vapour characteristics.
The WOLKENKRAFT Herb Leaf Filling Aid with slide makes it easy to fill a vaporizer with your favorite herbs. The Herb Leaf fits exactly into the chamber opening of your vaporizer and ensures that nothing goes wrong when filling.
ReviewsLimelight Frolic Vaporizer | Thermal Extractor for Herbs
The Limelight Frolic is a portable, high-end herbal vaporizer. The device is designed for fast heat-up times, high heating power and controlled extraction. Thanks to its combination of a hybrid heating system, precise temperature control and continuously adjustable airflow, the Frolic is suitable for a variety of uses, from aroma-focused sessions to dense vapour production.
Heating system with 120 watts of hybrid power
The Limelight Frolic Vaporizer features a hybrid heating system with high power reserves. The 120-watt heating power allows the target temperature to be reached quickly and maintained at a stable level even during longer draws. The hybrid concept combines intensive airflow heating with additional thermal support and ensures uniform extraction of the herbal material over several draws.
Two operating modes: Session mode and On Demand mode
The Limelight Frolic Vaporizer supports two different operating modes, which can be selected depending on the usage situation:
Session mode:
In session mode, a constant temperature is maintained throughout the entire session. This enables continuous use with even heat distribution.
On Demand Mode:
This mode is designed for individual puffs and allows for quick use without a long session. The very short heating time also makes the Frolic suitable for spontaneous use.
Session mode:
In session mode, a constant temperature is maintained throughout the entire session. This enables continuous use with even heat distribution.
On Demand Mode:
This mode is designed for individual puffs and allows for quick use without a long session. The very short heating time also makes the Frolic suitable for spontaneous use.
Temperature ranges and precise control
The temperature range depends on the selected mode:
- Session mode: 40 to 220 degrees Celsius
- On Demand mode: 40 to 240 degrees Celsius
The Frolic Vaporizer thus covers a very wide spectrum and allows precise adjustment to different herb profiles. Lower temperatures are geared towards aroma and terpene profile, while higher temperatures support more intensive extraction and stronger vapour production.
Airflow control with a wide adjustment range
The Frolic Vaporizer has continuously adjustable airflow control with a range of 0 to 25 litres per minute. This allows the draw behaviour to be adjusted from restrictive to very open. The air volume influences the extraction, the temperature stability during the draw and the perceived vapour intensity. The combination of high air flow and stepless regulation is particularly relevant for users who prefer a free draw feeling.
Steam path and cooling with modular design
The Frolic uses a modular cooling unit for vapour processing. The cooling path is around 200 mm, which means that the vapour travels a longer distance and can cool down noticeably. In addition, a swirl is integrated into the mouthpiece to further reduce the temperature of the vapour. The cooling unit can be completely dismantled for cleaning, which facilitates maintenance and supports consistent performance.
Materials, air path and workmanship
The Limelight Frolic vaporizer focuses on temperature-stable and durable materials. It is made of stainless steel and anodised aluminium from the 6000 series, as well as PEEK, a high-performance plastic. The air path is completely insulated and made of PEEK, which keeps the air flow clearly defined. This design is engineered for stable performance and clean air flow.
Display and operation
The Frolic is equipped with a 0.96-inch colour OLED display. It shows the mode, battery level, charge status, target temperature, actual temperature and timer information. The controls of the vaporizer are located on the underside, keeping the housing compact and reducing the front surface area. The display supports precise control of settings during use.
Replaceable battery system with 21700 and USB-C charging
The Limelight Frolic uses a replaceable 21700 battery. Depending on usage, approximately 10 to 15 sessions are possible. Charging is via USB-C with 5.0 V and 2.0 A. The replaceable battery system keeps the device flexible even during longer use, as the runtime can be extended with a second battery.
Herb chamber and capacity
The herb chamber is designed for a comparatively large filling and can be filled with up to 0.25 g of herbal material. In combination with the high heating power, this allows for uniform extraction even with larger filling quantities. In addition, it is described that uniform extraction is possible without stirring, which is relevant for a clean process and consistent results.
Modularity and ease of maintenance
The Frolic vaporizer has a modular design and is designed for tool-free maintenance. The concept focuses on easy disassembly and cleaning, which facilitates regular maintenance in everyday use. The design is built for long-term use and supports the replacement of individual components when wear parts need to be replaced.
Conclusion
The Limelight Frolic is a technically sophisticated herbal vaporizer with a clear focus on performance, control and modularity. The combination of very high heating power, extremely short heat-up times, two full operating modes and continuously adjustable airflow enables flexible use across a wide temperature range. The fully insulated air path, high-quality materials and modular design ensure a durable construction that is easy to maintain. Overall, the Frolic is positioned as a high-end thermal extractor for users who value precise control, reproducible results and maximum customisability.
Rating:
- Technology: 8.5
- Steam quality: 8.5
- Materials: 8.8
- Manufacturing quality: 8.8
- Functionality: 8.3
- Flexibility: 8.0
- Handling: 8.0
- Mobility: 8.4
- Battery life: 8.3
- Overall rating: 8.5
Details:
- Heating system: Hybrid, 120 watts
- Operating modes: Session mode and on-demand mode
- Temperature range session: 40 to 220 degrees Celsius
- Temperature range on-demand: 40 to 240 degrees Celsius
- Airflow control: 0 to 25 litres per minute
- Display: 0.96-inch colour OLED
- Battery: 21700 replaceable, 5000 mAh
- Charging: USB C, 5.0 V 2.0 A
- Herb chamber: up to 0.25 g
- Dimensions: 105 x 63 x 24 mm
- Weight: approx. 245 g including battery
Scope of delivery:
- 1 x Limelight Frolic Vaporizer Thermal Extractor
- 1 x 21700 battery
- 1 x USB-C to USB-C charging cable
- 1 x user manual
- 1 x cleaning brush
- 1 x silicone O-ring set
- 1 x FKM O-ring set
- 1 x mesh screen set
PRODUCT SAFETY INFORMATION
MANUFACTURER INFORMATION:
Butternut doo Jagodina
Kneza Milosa 129
Jagodina | Serbia
E-Mail: support@limelightherb.com
RESPONSIBLE PERSON EU:
Reinhart GmbH & Co. KG
Tempelhofer Straße 21
52068 Aachen | Germany
E-Mail: info@reinhart.shop
WARNING AND SAFETY INFORMATION
1. INTENDED USE
Butternut doo Jagodina
Kneza Milosa 129
Jagodina | Serbia
E-Mail: support@limelightherb.com
RESPONSIBLE PERSON EU:
Reinhart GmbH & Co. KG
Tempelhofer Straße 21
52068 Aachen | Germany
E-Mail: info@reinhart.shop
WARNING AND SAFETY INFORMATION
1. INTENDED USE
- The product is intended for extracting and inhaling flavouring substances from herbs and resins for non-medical use.
- The product may only be used with herbs and resins specifically suitable for aromatherapy. These herbs and resins are available from specialised retailers and pharmacies.
- The use of the product with unsuitable herbs and resins is not permitted.
- The use of the product with illegal substances is not permitted and may pose serious health risks.
- The product is not intended for use with tobacco or nicotine products.
- The use of accessories and spare parts not approved by the manufacturer is not permitted.
2. GENERAL SAFETY INSTRUCTIONS
- Read the instructions carefully, especially the ‘Safety’ chapter, before using the product.
- Only use the product as intended. Otherwise the warranty/guarantee and the manufacturer's liability will be invalidated.
- Only use the product within the given specifications.
- Keep the product, accessories and packaging out of the reach of children.
- Keep plastic bags and foils out of the reach of small children. Choking hazard!
- The product contains a lithium-ion battery that can burn or explode if handled improperly. Protect the product from excessive heat, direct sunlight and moisture.
- Only charge the product using the specified power supply.
- Never leave the product unattended while it is charging and switched on.
- Disconnect the product from the power supply after charging.
- If the product is not used for a longer period of time, fully charge the battery every six months at the latest.
- Only switch on and heat up the product when the mouthpiece is in place.
- Always ensure unobstructed ventilation of the product and keep the ventilation openings clear.
- Allow the product and inserted parts (e.g. filling chamber) to cool down completely before replacing inserted parts, changing the dosing capsule or carrying out cleaning work.
- The product is not waterproof. Never immerse the product in liquids or spray it directly with liquids and do not touch it with wet hands.
- Only clean the product with a dry, clean and soft cloth and the cleaning tools supplied.
- Do not modify, repair or disassemble the product. Opening the product can lead to personal injury, electric shock, fire, property damage and other hazards.
- Do not use the product if it is damaged. Please contact customer service to repair the product.
- The product is not authorised for use by minors, children, pregnant women and nursing mothers.
- If you have respiratory problems, consult a doctor before use.
- If respiratory symptoms occur during or after use, discontinue use and consult a doctor immediately.
- WARNING: If in doubt, consult a doctor about the effects and use of herbs and resins.
- WARNING: Risk of burns from hot parts. Do not touch hot metal parts.
- WARNING: Risk of burns from hot parts. Allow the product to cool down.
- CAUTION: Only charge the product using the specified power supply. Disconnect the product from the power supply after charging.
Write evaluation
Write the first Review!
Derzeit leider noch keine Produkt-Bewertungen. / Currently no product reviews.
Customers who bought this product also bought the following products:
new product
Limelight Frolic Vaporizer Angled Mouthpiece
Item-ID: 102882
Shipping time: 1-2 Days
Stock: not in stock
Reviews: 
0 of 5 stars! (0)
0 of 5 stars! (0)The angled mouthpiece for the Limelight Frolic is a compatible accessory for the Frolic Thermal Extractor and serves as an alternative to the straight mouthpiece. The angled design changes the draw position and can provide a more ergonomic inhalation experience.
24,95 EUR
19 % VAT incl. excl. Shipping costs
AquaVape³ Waterfilter | Bubbler 2-parts
Item-ID: 101369
Shipping time: 1-2 Days
Stock: in stock
Reviews: 
5 of 5 stars! (66)
5 of 5 stars! (66)Our bestseller has been improved even further! This Aquavape vaporizer water filter made of robust borosilicate glass provides for a more pleasant inhalation when using different vaporizers.
19,95 EUR
19 % VAT incl. excl. Shipping costs
new product
Limelight Frolic Vaporizer Flat Mouthpiece
Item-ID: 102881
Shipping time: 1-2 Days
Stock: almost sold out
Reviews: 0 of 5 stars! (0)
0 of 5 stars! (0)The flat mouthpiece for the Limelight Frolic is a compatible accessory designed for direct inhalation without any additional extension or attachment. It is designed to keep the vapour path compact while directing the airflow straight to the mouth. The flat mouthpiece is an alternative to the stan...
20,95 EUR
19 % VAT incl. excl. Shipping costs
new product
Limelight Frolic Vaporizer WPA Adapter 14 mm
Item-ID: 102883
Shipping time: 1-2 Days
Stock: not in stock
Reviews: 0 of 5 stars! (0)
0 of 5 stars! (0)The 14 mm WPA adapter for the Limelight Frolic is a dedicated accessory for using the Frolic Thermal Extractor with external water filtration systems such as glass bubblers or water pipes with a 14 mm cut. Routing the vapour through a water filter allows additional cooling and conditioning withou...
14,95 EUR
19 % VAT incl. excl. Shipping costs
new product
Limelight Frolic Vaporizer WPA Adapter 18 mm
Item-ID: 102884
Shipping time: 1-2 Days
Stock: almost sold out
Reviews: 0 of 5 stars! (0)
0 of 5 stars! (0)The 18 mm WPA adapter for the Limelight Frolic is a dedicated accessory for using the Frolic Thermal Extractor with external water filtration systems such as glass bubblers or water pipes with a 18 mm cut. Routing the vapour through a water filter allows additional cooling and condition...
17,95 EUR
19 % VAT incl. excl. Shipping costs
Storz & Bickel Filling Aid Magazine with 8 Capsules and 8 Extract Pads
Item-ID: 101857
Shipping time: 1-2 Days
Stock: in stock
Reviews: 5 of 5 stars! (11)
5 of 5 stars! (11)The Storz & Bickel Filling Aid allows for clean and efficient filling of dosing capsules for the manufacturer’s compatible vaporizers. Its design enables multiple capsules to be prepared at the same time, allowing material to be portioned precisely and without spilling.
15,95 EUR
19 % VAT incl. excl. Shipping costs
WOLKENKRAFT Ecological Brush (3 pcs. box)
Item-ID: 132192
Shipping time: 1-2 Days
Stock: in stock
Reviews: 5 of 5 stars! (21)
5 of 5 stars! (21)WOLKENKRAFT cleaning brushes feature a sturdy wooden handle and fine natural bristles, and are designed for thoroughly cleaning the herb chamber of your vaporizer after it has cooled down. They are compatible with various vaporizers, such as the WOLKENKRAFT FX MINI ULTRA, ÄRiS ULTRA, and LIVE.
3,95 EUR
19 % VAT incl. excl. Shipping costs
Storz & Bickel Filling Aid Magazine with 8 Capsules
Item-ID: 101545
Shipping time: 1-2 Days
Stock: a few in stock
Reviews: 5 of 5 stars! (17)
5 of 5 stars! (17)The Storz & Bickel filling aid makes it easy to fill dosing capsules cleanly and quickly for the manufacturer’s compatible vaporizers. Thanks to its well-thought-out design, multiple capsules can be prepared at the same time, allowing herbs to be portioned efficiently.
8,95 EUR
19 % VAT incl. excl. Shipping costs
special
Vaporizer Tool | Stir Stick for Vaporizer
Item-ID: 102238
Shipping time: 1-2 Days
Stock: in stock
Reviews: 5 of 5 stars! (2)
5 of 5 stars! (2)The Vaporizer stirring rod for vaporizer is for removing residues from the herb chamber or for layering the herbs.
1,20 EUR
19 % VAT incl. excl. Shipping costs
Storz & Bickel Capsule Caddy incl. 4 Dosing Capsules and Drip Pads
Item-ID: 101829
Shipping time: 1-2 Days
Stock: almost sold out
Reviews: 
4 of 5 stars! (16)
4 of 5 stars! (16)The Storz & Bickel Keychain Magazine is a practical carrying solution for dosing capsules and accessories. The compact aluminum case reliably protects the capsules inside and can be conveniently attached to a keychain, keeping pre-filled capsules within easy reach at all times.
8,95 EUR
19 % VAT incl. excl. Shipping costs
special
TinyMight V2 hot chamber ring
Item-ID: 102019
Shipping time: 1-2 Days
Stock: almost sold out
Reviews: 0 of 5 stars! (4)
0 of 5 stars! (4)The TinyMight V2 Heating Chamber Ring is designed to securely seal the heating chamber in the TinyMight V2 vaporizer.
11,95 EUR
19 % VAT incl. excl. Shipping costs
Wolkenkraft Cleaning Wipes Set (6 pieces)
Item-ID: 112444
Shipping time: 1-2 Days
Stock: in stock
Reviews: 4 of 5 stars! (12)
4 of 5 stars! (12)Original alcohol-free Wolkenkraft cleaning wipes (6 pieces in the box) for cleaning your vaporizer and accessories.
2,95 EUR
19 % VAT incl. excl. Shipping costs
This Product was added to our catalogue on 26/01/2026.
