PAX 3 Vaporizer Complete Kit *Charcoal* AquaVape³ Set
ReviewsPAX 3 Vaporizer Complete Kit *Charcoal* (black, matt) in the AquaVape³ Set
The PAX 3 Vaporizer is the all-round successor of the very successful PAX 2 Vaporizer made in the US. Pax Labs has added some sensible improvements to the newest PAX. The PAX 3 is the first PAX with dual use and is able to vaporize both herbs and extracts. The heating element was also improved and only takes 15 seconds to heat up generating even better vapor clouds.
Dual Use
PAX 3 can not only vaporize herbs but also extracts. For this reason PAX3 now has a extract insertion.
The result is that the used material is turned into vapor evenly. A special cap for the chamber provides very good vaporization results even if the chamber is only filled half.
The result is that the used material is turned into vapor evenly. A special cap for the chamber provides very good vaporization results even if the chamber is only filled half.
Discreet and appealing design
PAX 3 combines discretion (thanks to its quiet operation and inconspicuous design), elegant appearance and functionality in one vaporizer. The high-quality case made of brushed aluminum is available in 4 sophisticated colours (charcoal, topaz, flare and platinum). The entire design is focused on handiness, functionality and comfort. PAX 3 only weighs about 90 grams and this makes it one of the lightest vaporizers.
High-performance battery and magnetic charging station
The PAX 3 is operated with an integrated lithium ions battery with a 3500 mAh capacity. That amounts to a 16% higher than previously achieve with PAX 2! In order to recharge PAX 3 the device is simply put on the charging station that magnetically loads the battery. The integrated battery can be fully recharged within 3 hours. The full charging status can be seen with the continuous gleam of the white "X" light. The battery has a long time span and lasts for up to 10 fillings.
Herb chamber made of stainless steel and high end heating element
The herb chamber and the entire heating channel are made out of high-quality stainless steel. That provides for a pure vapor experience. The modern caption heating element provides for swift heating between 30 and 60 seconds (depending on temperature).
Four temperature levels and simple operation
PAX 3 can be operated at four temperature levels. The temperature range lies between 182°C and 216°C which is ideal for most types of herbs. By pressing the mouthpiece it is possible to set the desired temperature. Pressing it first will heat up PAX at the second level of 193°C (perfect for most types of herbs). The LED-"X" shows with the constant gleam of the green light that the temperature has been reached. Now the PAX 3 is in the standard mode and one can start with the inhalation. Afterwards it is possible to set all other temperature levels (182°C, 193°C, 204°C, 216°C) after pressing the mouthpiece for about two seconds (red "X").
Automatic stand by function, movement sensors
The movement sensors kick in when the PAX 3 is put down and the stand-by mode is initiated. This protects device and battery. Safety is also guaranteed: PAX 3 switches off automatically after being non-operational for 3 minutes.
PAX Smartphone APP
The smartphone app for PAX is optional. The temperature settings can of course also be made on the device. The PAX Smartphone APP is available here:
for Apple device:
https://itunes.apple.com/us/app/pax-vapor/id1119646621?mt=8
for Android device:
https://play.google.com/store/apps/details?id=com.pax.app
With the help of the APP you are able to make following settings:
for Apple device:
https://itunes.apple.com/us/app/pax-vapor/id1119646621?mt=8
for Android device:
https://play.google.com/store/apps/details?id=com.pax.app
With the help of the APP you are able to make following settings:
- Set exact temperature
- Change colour mode on LED
- Download company software updates
- Lock/unlock device
PAX 3 is a small handy device that can be operated easily. Thanks to a number of sensible changes it has improved in respect to functionality and portability. This has resolved a number of problems. The careful workmanship with use of high-quality materials and long guarantee offer safety and comfort across the board. The appearance is great. This is one of the best portable vaporizers available - finally it has made it to Europe!
We are an authorized trader for the manufacturer. For this reason the PAX 3 has a 10 year manufacturer guarantee!
AquaVape³ water filter with 14er-cut
This accessory is a must for anyone who wants to use our various vaporizers for added efficiency and performance. The water filter is made of the highest quality borosilicate glass and ensures that the steam is even cooler and therefore better for your neck and lungs.What is the advantage of using a water filter with a vaporizer?
Since the steam is additionally filtered, it is cooled down immediately after production and freed from any final impurities. The steam is thus much cleaner and fresher and the inhalation is almost pollutant free.
The water filter can be used with the right adapter with many different vaporizers.
ATTENTION: Vaporizers are mostly electronic. Therefore, they must not come into contact with water. Please do not add too much water and do not keep the water filter at an angle, so that no water leaks! Before putting on the vaporizer, please check that the cut is dry and that no water can run into the vaporizer or heating chamber!
Improvements of the AquaVape³ compared to the AquaVape²:
- Two-piece with cap: easy filling and easier cleaning
- High quality and thick borosilicate glass
- Smaller, slimmer and better to handle
- Optimal amount of water is held and the perk slots are completely covered
- Nevertheless, no high splash of water ... the mouth stays dry
- Accurate 14mm cut (no wobbling)
AquaVape³ vaporizer waterfilter Details:
- Height: 125 mm
- Diameter: 30 mm
- water filtration
- a lot of percolators
- Borosilicate glass / glassware
- 14er inside cut (14.5 mm)
Pax 2/3 Water Filter Adapter with 14 mm cut
With the water filter adapter it is possible to connect any water filter or glass bong with a 14 mm cut to the PAX 2/3 Vaporizers.
Simply pull the seal ring over the top edge of the PAX and put on the adapter. Then you can put on any desired water filter with 14 mm cut.
Simply pull the seal ring over the top edge of the PAX and put on the adapter. Then you can put on any desired water filter with 14 mm cut.
Pax 2/3 Water Filter Adapter Details:
- Material: Lab glass
- 14er cut
PAX 3 Details:
- High-quality vaporizer for herbs and extracts
- Patented and unique design
- High-quality casing
- Intuitive operation and great appearance
- New caption heating element with swift heating up
- Herb chamber and channel made of stainless steel
- 4 temperature levels between 182°C and 216°C
- Small, functional and handy
- Size: around 9.8 cm x 3.1 cm x 2.2 cm
- Weight: around 90 grams
- Extra features and mini games such as party Mode, Simon Game, Funkytown etc.
Scope of Delivery:
- 1x PAX 3 Vaporizer Complete Kit in *Charcoal* (Schwarz, matt)
- 1x AquaVape³ Waterfilter with 14 mm cut
- 1x Water filter adapter 14 mm for PAX 2 and PAX 3 Vaporizer
- 1x Silicone seal ring
- 1x PAX magnetic USB charging station
- 1x PAX silicone mouthpiece flat (pre-assembled)
- 1x PAX silicone mouthpiece conic (elevated edge)
- 1x PAX heating chamber fastener flat (pre-assembled)
- 1x PAX heating chamber fastener low
- 4x PAX heating camber sieves (1x pre-assembled)
- 1x PAX adapter chamber for fluids
- 2x PAX seal ring for adapter chamber (1x pre-assembled)
- 1x PAX tool key ring
- 1x PAX 3 part cleaning set (cleaning brush & 10x small pipe rings)
- 1x PAX 3 manual including in German
All spare parts for PAX 3 and PAX 2 are compatible with each other.
Write evaluation
Write the first Review!
Derzeit leider noch keine Produkt-Bewertungen. / Currently no product reviews.
This Product was added to our catalogue on 24/01/2020.
