Europe's No. 1 Vaporizer Store
Orders placed by 12 am: Same-day shipping
Free shipping from € 50 order value (GE)
All relevant payment methods
Trustami: 98% - 36,000+ verified reviews
Trustpilot: 4.8 - 10,000+ verified reviews
B2B
Settings
Shipping country
Languages
Currencies
Order accessories:
The Cuboo Pro V2 Induction Heater is an innovative and efficient solution for heating metal vaporizers such as the DynaVap.
- Products description
- Reviews
- Trustpilot
- Manufacturer Information
Products description
Cuboo Heater XL Induction Heater
The Cuboo Heater XL is a powerful induction heater for compatible metal vaporisers and thermal extraction devices. Heating is flame-free via induction and replaces classic torch lighters, jet flame lighters and gas-powered heaters. This enables uniform, reproducible heating without an open flame and without direct contact with a heat source.
Power range and stepless adjustment
The Cuboo Heater XL offers stepless power control in the range from 30 watts to 100 watts. The heating power can thus be adjusted to different devices, caps and desired heat cycles. The large control range is particularly relevant when using different metal vaporisers or when a finer balance between rapid heating and a controlled heating curve is desired.
XL design and large coil
A larger coil is integrated into the Cuboo Heater XL. In combination with the XL design, this creates a generous heating zone that is advantageous for many device shapes. This often makes the model suitable for setups where standard induction heaters are too short or too narrow.
Height-adjustable heating chamber for precise positioning
The heating chamber is height-adjustable. This allows the position of the vaporiser in the coil area to be adjusted precisely. Defined positioning supports consistent results and facilitates reproducible heating routines for repeated applications.
Internal structure with replaceable glass tube and ceramic insert
The Cuboo Heater XL has a replaceable glass tube with a ceramic insert. This design facilitates cleaning and supports clean, stable guidance in the heating area. The glass tube can be replaced if necessary, which increases ease of maintenance.
Display with rotatable screen
The integrated display can be rotated 180 degrees. This makes the display easier to read depending on the setup, for example when used on a table or within a fixed desktop setup. The display supports clearer control of the set power.
Battery operation with 21700 system
The Cuboo Heater XL is powered by two 21700 batteries. The batteries are not included in the scope of delivery. The 21700 system is designed for higher power output and supports use up to 100 watts. This means that the Cuboo Heater XL can be used as a mobile induction heater without being tied to a fixed power supply.
Automatic power limitation when required
If battery power is limited or the material is not optimally inductive, the maximum power can be reduced automatically. In this case, the maximum available power is displayed as a notification. This ensures that use remains stable and controllable even under changing conditions.
Details:
- Product type: Induction heater
- Heating principle: Induction, flameless
- Power range: 30 watts to 100 watts, continuously adjustable
- Heating chamber: Height-adjustable
- Coil: Large coil for XL heating zone
- Internal structure: replaceable glass tube with ceramic insert
- Display: 180 degrees rotatable
- Power supply: 2 x 21700 rechargeable batteries, not included
Scope of delivery:
- 1 x Cuboo Heater XL induction heater
This Product was added to our catalogue on 26/01/2026.
Customer reviews
Average rating: 0
Based on 0 Customer reviews
Write the first Review!
Trustpilot
Manufacturer Information
MANUFACTURER INFORMATION:
VDN Berlin GmbH
Karl-Kunger-Str 28
12435 Berlin
E-Mail: shop@verdampftnochmal.de
RESPONSIBLE PERSON EU:
VDN Berlin GmbH
Karl-Kunger-Str 28
12435 Berlin
E-Mail: shop@verdampftnochmal.de
WARNING AND SAFETY INFORMATION
1. INTENDED USE
• The product is intended for extracting and inhaling flavourings from herbs and resins for non-medical use.
• The product may only be used with herbs and resins specifically suitable for aromatherapy. These herbs and resins are available from specialised retailers and pharmacies.
• The use of the product with unsuitable herbs and resins is not permitted.
• The use of the product with illegal substances is not permitted and may pose serious health risks.
• The product is not intended for use with tobacco or nicotine products.
• The use of accessories and spare parts not approved by the manufacturer is not permitted.
2. GENERAL SAFETY INSTRUCTIONS
• Read the instructions carefully, especially the "Safety" chapter, before using the product.
• Only use the product as intended. Otherwise the warranty/guarantee and the manufacturer's liability will be invalidated.
• Only use the product within the given specifications.
• Keep the product, accessories and packaging out of the reach of children.
• Keep plastic bags and foils out of the reach of small children. Choking hazard!
• The product contains a lithium-ion battery that can burn or explode if handled improperly. Protect the product from excessive heat, direct sunlight and moisture.
• Only charge the product with the specified power supply.
• Never leave the product unattended while it is charging and switched on.
• Disconnect the product from the power supply after charging.
• If the product is not used for a longer period of time, fully charge the battery every six months at the latest.
• Only switch on and heat up the product when the mouthpiece is in place.
• Always ensure unobstructed ventilation of the product and keep the ventilation openings clear.
• Allow the product and inserted parts (e.g. filling chamber) to cool down completely before replacing inserted parts, changing the dosing capsule or carrying out cleaning work.
• The product is not waterproof. Never immerse the product in liquids or spray it directly with liquids and do not touch it with wet hands.
• Only clean the product with a dry, clean and soft cloth and the cleaning tools supplied.
• Do not modify, repair or disassemble the product. Opening the product can lead to personal injury, electric shock, fire, property damage and other hazards.
• Do not use the product if it is damaged. To repair the product, please contact customer service.
• The product is not authorised for use by minors, children, pregnant and breastfeeding women.
• If you have respiratory problems, consult a doctor before use.
• If respiratory symptoms occur during or after use, discontinue use and consult a doctor immediately.
• WARNING: If in doubt, consult a doctor about the effects and use of herbs and resins.
• WARNING: Risk of burns from hot parts. Do not touch hot metal parts. Allow the product to cool down.
• CAUTION: Only charge the product using the specified power supply. Disconnect the product from the power supply after charging.
VDN Berlin GmbH
Karl-Kunger-Str 28
12435 Berlin
E-Mail: shop@verdampftnochmal.de
RESPONSIBLE PERSON EU:
VDN Berlin GmbH
Karl-Kunger-Str 28
12435 Berlin
E-Mail: shop@verdampftnochmal.de
WARNING AND SAFETY INFORMATION
1. INTENDED USE
• The product is intended for extracting and inhaling flavourings from herbs and resins for non-medical use.
• The product may only be used with herbs and resins specifically suitable for aromatherapy. These herbs and resins are available from specialised retailers and pharmacies.
• The use of the product with unsuitable herbs and resins is not permitted.
• The use of the product with illegal substances is not permitted and may pose serious health risks.
• The product is not intended for use with tobacco or nicotine products.
• The use of accessories and spare parts not approved by the manufacturer is not permitted.
2. GENERAL SAFETY INSTRUCTIONS
• Read the instructions carefully, especially the "Safety" chapter, before using the product.
• Only use the product as intended. Otherwise the warranty/guarantee and the manufacturer's liability will be invalidated.
• Only use the product within the given specifications.
• Keep the product, accessories and packaging out of the reach of children.
• Keep plastic bags and foils out of the reach of small children. Choking hazard!
• The product contains a lithium-ion battery that can burn or explode if handled improperly. Protect the product from excessive heat, direct sunlight and moisture.
• Only charge the product with the specified power supply.
• Never leave the product unattended while it is charging and switched on.
• Disconnect the product from the power supply after charging.
• If the product is not used for a longer period of time, fully charge the battery every six months at the latest.
• Only switch on and heat up the product when the mouthpiece is in place.
• Always ensure unobstructed ventilation of the product and keep the ventilation openings clear.
• Allow the product and inserted parts (e.g. filling chamber) to cool down completely before replacing inserted parts, changing the dosing capsule or carrying out cleaning work.
• The product is not waterproof. Never immerse the product in liquids or spray it directly with liquids and do not touch it with wet hands.
• Only clean the product with a dry, clean and soft cloth and the cleaning tools supplied.
• Do not modify, repair or disassemble the product. Opening the product can lead to personal injury, electric shock, fire, property damage and other hazards.
• Do not use the product if it is damaged. To repair the product, please contact customer service.
• The product is not authorised for use by minors, children, pregnant and breastfeeding women.
• If you have respiratory problems, consult a doctor before use.
• If respiratory symptoms occur during or after use, discontinue use and consult a doctor immediately.
• WARNING: If in doubt, consult a doctor about the effects and use of herbs and resins.
• WARNING: Risk of burns from hot parts. Do not touch hot metal parts. Allow the product to cool down.
• CAUTION: Only charge the product using the specified power supply. Disconnect the product from the power supply after charging.
This product is compatible with:
The Cuboo Pro V2 Induction Heater is an innovative and efficient solution for heating metal vaporizers such as the DynaVap.
99,00 EUR
The Cuboo Heater Pro V2 replacement glass is suitable for replacing worn glass in the Cuboo Heater Pro V2 induction heater.
4,95 EUR
Special offer
RATING: 7.8 | The DynaVap M7 vaporizer is a manual stainless steel herbal vaporizer with hybrid vaporization and an Adjust a Bowl feature. The DynaVap M7 vaporizer offers full temperature control without a battery and impresses with its compact design and precise extraction.
109,00 EUR 69,00 EUR37%
Special offer
RATING: 7.8 | The DynaVap M7 XL vaporizer is a manual stainless steel herbal vaporizer with an XL air path, adjustable airflow, and Adjust a Bowl function for microdosing. Battery-powered, robust, and precisely controllable for controlled vaporization with a lighter or induction.
129,00 EUR 89,00 EUR31%
Special offer
The heating cap from DynaVap functions as a bimetal and shows with a click the ideal temperature.
19,95 EUR 14,95 EUR25%
This water filter is made of robust borosilicate glass and provides for a more pleasant inhalation when using with different vaporizers .
21,95 EUR
With the Vap Storage you are able to protect your DynaVap Vaporizer against bumps, dirt and moisture. This plastic case is specially designed for the DynaVap M and S models.
1,95 EUR
The enhanced plastic mouthpiece also serves as a 14" adapter for e.g. a water filter like that for AquaVape²
2,95 EUR
The Titanium Coil for all DynaVap DynaCap vaporizers has been specially developed for the vaporization of resins, waxes and oils.
34,95 EUR
Three replacement sieves made of stainless steel for the DynaVap herb chamber.
7,95 EUR
DynaVap Herb Chamber replacement sieves made of titanium.
12,95 EUR
DynaVap VapCap SS Condenser O-ring Kit (3 pcs.) for DynaCap "M" and "S".
3,95 EUR
The MAD Heaters Tempest 2 chamber screens are precisely fitting replacement screens for the herb chamber of the MAD Heaters Tempest 2 vaporizer. They ensure that the plant material remains securely in the chamber while allowing for an even airflow through the vaporizer.
9,95 EUR
The MAD Heaters Tempest 2 ball retention screens are original replacement screens for the heating head of the MAD Heaters Tempest 2 vaporizer. They hold the thermal balls securely in place inside the heating system and ensure that heat is stored and released evenly.
9,95 EUR
Special offer
RATING: 8.1 | The MAD Heaters Tempest 2 vaporizer with innovative ball vape technology for efficient herb vaporization. The MAD Heaters Tempest 2 vaporizer is a premium mechanical vaporizer without a battery, offering intense vapor production and precise temperature control.
259,00 EUR 219,00 EUR15%
Special offer
RATING: 8.1 | The MAD Heaters Tempest 2 vaporizer with innovative ball vape technology for efficient herb vaporization. The MAD Heaters Tempest 2 vaporizer is a premium mechanical vaporizer without a battery, offering intense vapor production and precise temperature control.
259,00 EUR 219,00 EUR15%
Special offer
The DynaVap Hyper Cap is a titanium cap developed for the HyperDyn vaporizer which, in combination with the Hyper Tip, enables a particularly intense and individually controllable vaporisation experience. Made from high-quality medical-grade titanium, the Hyper Cap impresses with its extreme heat resistance and durability.
69,95 EUR 49,99 EUR29%
Special offer
The stainless steel dosing capsules for the DynaVap HyperDyn vaporiser are ideal for precise herb dosing and clean handling. Each set contains 5 dosing capsules and can be filled with approx. 0.12 g per capsule.
39,95 EUR 29,99 EUR25%
Special offer
The DynaVap Hyper Tip is the centrepiece of the HyperDyn vaporizer and has been manufactured for maximum efficiency and a particularly intense vaping experience. Made from ultra-light and at the same time high-temperature resistant titanium, the Hyper Tip combines the latest technology with sophisticated design.
69,95 EUR 49,99 EUR29%
The DynaVap Thermal Hyper Cap for the HyperDyn is an innovative further development of the classic Hyper Cap. It is characterised by improved thermal properties, a faster heat-up time and particularly stable temperature behaviour.
79,95 EUR
Special offer
RATING: 8.0 | The DynaVap HyperDyn vaporizer is a manual big bowl titanium vaporizer with up to 0.25 g chamber capacity and seven-step airflow control. The DynaVap HyperDyn vaporizer combines robust titanium construction, modular design, and direct water filter compatibility for maximum control.
259,00 EUR 189,00 EUR27%
Customers who bought this product also bought the following products:
New
The DynaVap M7 XL Stealth is a battery-free dry herb vaporizer with a lightweight titanium tip, stem, and mouthpiece, finished in dark DuraDyn® Stealth. It features the Captive Cap click system, an extended XL vapor path, six airflow settings, Pivot Airport, and an approx. 0.1 g chamber with Adjust-a-Bowl. The M7 XL Stealth is heated with a torch lighter or induction heater and is designed for users who prefer direct manual control and premium titanium construction.
139,00 EUR
Special offer
RATING: 8.1 | The MAD Heaters Tempest 2 vaporizer with innovative ball vape technology for efficient herb vaporization. The MAD Heaters Tempest 2 vaporizer is a premium mechanical vaporizer without a battery, offering intense vapor production and precise temperature control.
259,00 EUR 219,00 EUR15%
Special offer
RATING: 8.1 | The MAD Heaters Tempest 2 vaporizer with innovative ball vape technology for efficient herb vaporization. The MAD Heaters Tempest 2 vaporizer is a premium mechanical vaporizer without a battery, offering intense vapor production and precise temperature control.
259,00 EUR 219,00 EUR15%
The WOLKENKRAFT Herb Leaf Filling Aid with slide makes it easy to fill a vaporizer with your favorite herbs. The Herb Leaf fits exactly into the chamber opening of your vaporizer and ensures that nothing goes wrong when filling.
2,95 EUR
The WOLKENKRAFT LIVE Mouthpiece Base Complete Set for the WOLKENKRAFT LIVE vaporizer includes the WOLKENKRAFT LIVE Mouthpiece Base, a Ceramic Mouthpiece, a Sealing ring with Mouthpiece Screen and a COOLSCREEN® Ceramic Filter Module incl. COOLSCREEN® Gold Filter.
59,95 EUR
WOLKENKRAFT LIVE Chamber Lock Ring for replacement in the combustion Chamber of the WOLKENKRAFT LIVE Vaporizer. The Lock Ring secures the combustion Chamber inside the WOLKENKRAFT LIVE Vaporizer.
4,95 EUR
The WOLKENKRAFT LIVE Mouthpiece Screens (3 pieces) for replacement between the Mouthpiece Base and the Locking Ring of the WOLKENKRAFT LIVE Vaporizer. The Mouthpiece Screen prevent herbs from being drawn into the Mouthpiece unit.
3,95 EUR
The WOLKENKRAFT LIVE Seal Ring Set for replacement on the respective parts of the Mouthpiece Base of the WOLKENKRAFT LIVE Vaporizer. The Seal Rings ensure that the corresponding parts of the WOLKENKRAFT LIVE Vaporizer are securely sealed.
5,95 EUR
The WOLKENKRAFT LIVE Dosing Capsule for Herbs for precise dosing and easy use in the WOLKENKRAFT LIVE Vaporizer. This practical capsule can be easily inserted into the WOLKENKRAFT LIVE Vaporizer and ensures convenient and clean use.
4,95 EUR
The Storz & Bickel Filling Aid allows for clean and efficient filling of dosing capsules for the manufacturer’s compatible vaporizers. Its design enables multiple capsules to be prepared at the same time, allowing material to be portioned precisely and without spilling.
15,95 EUR
Last viewed:
The Cuboo Heater XL is a powerful induction heater for compatible metal vaporisers and thermal extraction devices. Heating is flame-free via induction and replaces classic torch lighters, jet flame lighters and gas-powered heaters. This enables uniform, reproducible heating without an open flame and without direct contact with a heat source.
129,00 EUR
New
The WOLKENKRAFT ViTA Filter Set is the matching replacement part set for the WOLKENKRAFT ViTA Vaporizer. It includes the silicone filter module for the inner mouthpiece assembly, as well as a ceramic screen and a stainless steel screen. This makes the set ideal for replacing worn or dirty filter components and keeping the vaporizer reliably ready for use.
4,95 EUR
Special offer
The cooling unit for the TinyMight V2 vaporizer ensures pleasantly cool and pure-tasting vapor. Made of stainless steel, it is inserted into the mouthpiece to ensure an optimal vapor experience.
29,95 EUR 27,95 EUR7%
Payments
Sie können bei uns schnell, sicher und unkompliziert zahlen. Es stehen die wichtigsten Zahlungsmethoden innerhalb Europas zur Verfügung.
Sponsor
Vapowelt setzt sich für einen vernünftigen und stigmatisierungsfreien Umgang mit einer der wertvollsten Pflanzen der Welt ein und ist Sponsor des Deutschen Hanfverbandes.
All prices incl. VAT. plus shipping and handling. The crossed out prices correspond to the previous price at VAPOWELT® Vaporizer Shop - Vaporizer kaufen vom Spezialisten.
VAPOWELT® Vaporizer Shop - Vaporizer kaufen vom Spezialisten © 2026
VAPOWELT® Vaporizer Shop - Vaporizer kaufen vom Spezialisten © 2026